Featured
Painting A Rocker Cover
Painting A Rocker Cover. Painting your rocker cover is the perfect way to attract attention to your engine bay, it is relatively easy all you need to do correctly is prep the surface and purchase the right paint. Would anybody be able to point me in the right direction of some decent paint for my rocker cover, blue ideally, got the z18xe which doesn't have the replaceable spark cover just that huge ecotec engine cover which id like to do away with.

Turns out its magnesium and was slowly destroying itself, so has grooves all over it. Powder coating or painting rocker cover???????? Took bolt, key and pulley off.
Alternatively Use A Hair Dryer Or Heat Gun To Warm The Rocker Cover (It Just Needs To Be Warm To The Touch) Then Spray/Paint The Cover Before Wafting The Hair.
Not keen on the finish on vht paint. Well its happened again, and its truely fucked it now. Spray paint of your choice, i chose matte black vht spray.
Use A File To Remove Any Casting Dags/Burrs Around The Edges To Give It A Smooth Look.
Once you're happy with the primer. New toyota washers and nuts (not necessary, but might as well!) Be apart of sau community by signing in or creating an account.
If You Want To Paint Your Cam Cover Get Yourself Some Two Pack Primer And Top Coat That Won't Blister Or Disculour, And To Get The Lettering Sorted Get A Large File And Cearfuly File The Letters, You Can Always Wrap Some Fine Abrasive Around File To Finnish Of !
Stand at different angles to the cover in order to get all sides and all edges. [report] [news] saturday 27th march 2010. Joined jun 21, 2004 · 1,427 posts.
Work Your Way Up In Grades Of Sand Paper I.e 150, 240, 320, 400, 600, 800.
I used an acid etch primer (upol aerosol) and satin black for one of the cosworths a few years back, durability was fine. If you want to use paint the anything that is aluminium based really needs an etch primer (phosphic acis based) to get decent adhesion for the top coat. 1992 300e (manual) joined may 16, 2009.
Painting Your Rocker Cover Is The Perfect Way To Attract Attention To Your Engine Bay, It Is Relatively Easy All You Need To Do Correctly Is Prep The Surface And Purchase The Right Paint.
**be careful as too much heat can cause the paint to lift.**. Just clean it well using prepsol or similar product, paint it using a can of spray engine enamel, vht have plenty of colours, and then using a sanding block and a bit of wet and dry carefully sand back the raised section. Once the applied gravel guard 2 is dry, it is.
Comments
Post a Comment